LoadBear

Installations

Mixed Projections & Elevations — Bracket Configurations That Clear the Job

Walls with different projections and elevations — LoadBear stainless brackets (extensions, soffit steps and spreaders) that clear the job and look the part.

The LoadBear Team2 min read

All manner of bracket configuration is covered by LoadBear if you have walls with different projections and elevations. We supply the solution to the problem — and uniquely our brackets are stainless steel and among the best looking ones available.

This recent install shows why a single stock plate rarely fits a real house. Conservatory frames, recessed doorways, gutters and soffits all sit at different depths and heights. The cassette still has to run level, so each mount is built for the wall it meets.

Striped cassette awning extended over a stone patio between brick and conservatory walls on LoadBear brackets

Courtyard install — one awning spanning walls that do not share the same face or height.

Level cassette across stepped walls

Where a window wall sits back from a door pier, different bracket depths bring the cassette into one straight line. The hardware does the compensation; the fabric and arms stay true.

White cassette awning spanning recessed brick walls of different projections on LoadBear brackets

Same cassette, two wall planes — projection brackets keep the headbox flush and level.

Clearing gutters and eaves

Horizontal extension arms stand the cassette clear of gutters and conservatory frames. Vertical uprights step out past deep soffits so the load still goes into the brick, not the plastic drainage line.

White LoadBear extension bracket clearing a gutter under a Llaza cassette on brick

Extension arm off the wall plate — cassette clear of the gutter, wiring tucked tidy.

White LoadBear upright stepping out past a soffit to carry an awning cassette

Soffit step — upright on the brick, offset at the eaves so the cassette sits where the wall alone cannot.

Spreader elevation on the return

On the return elevation a long vertical spreader drops the mount to clear the gutter run and still take the folding-arm load into sound masonry.

Striped awning on a white LoadBear vertical spreader bracket clearing a gutter on brick

Spreader on the side wall — clearance for the downpipe, solid fix into the brick.

Specifying a mixed-projection set

If your walls do not share one face — different projections, eaves heights, gutters or conservatory returns — send wall photos and the awning model. We will recommend or design the right stainless LoadBear set from Birmingham.

Awning brackets · Custom request · Gallery · Contact us