Birmingham Workshop — Stainless Awning Brackets Built Through Bad Weather
November workshop batch from Birmingham — stainless awning brackets with 40 years of laser cutting and fabrication behind every weld.
Even with the bad weather, LoadBear is the go-to manufacturer for your awning brackets. We manufacture in Birmingham, UK, with 40 years of laser cutting and fabrication experience — so you get corrosion-resistant, structurally superior hardware with great aesthetics to suit the job.
This November workshop batch is the usual mix: gutter brackets built to order forms, offset and extreme geometries, gusseted L-sections and stud plates — all stainless, welded in-house, paperwork travelling with the steel.

Pallets on the shop floor — angled uprights, stud plates and drawings for the live orders.
Built to the form, not a near-enough plate
Order sheets and dimensioned drawings sit with each set from weld through inspection. A/B/C on the gutter form, brushed stainless called out, customer geometry checked before anything moves on.

Gutter bracket order form with the batch — stainless called, dimensions locked.

Offset and stepped sets with drawings on top — projection changes designed in, not guessed on site.

Angled cassette mounts and wall plates — geometry matched to the approved sketch.
Extreme gutter work in the same run
When a standard upright will not clear the eaves, the Extreme gutter geometry steps out and up. Same stainless, heavier section, gussets where the load path needs them.

Extreme gutter set labelled on the form — heavier duty for the awkward eaves line.
Welds, gussets and the details that last
Close in, the batch shows why stainless from a fabrication shop beats a painted mild-steel plate: TIG heat tint at the gussets, internal ribs, laser-cut slots, and edges that will take weather without staining the brick.

Gusseted L-brackets upright on the pallet — corner reinforcement welded before dress.

Gusset welds — heat tint still visible on fresh stainless before finishing.

Inside the section — ribs, slots and stud positions cut and welded true.

Another view of the same run — consistent geometry across the pallet.
Need brackets for your next install?
If you need corrosion-resistant stainless awning brackets — standard, extreme gutter, or a one-off for mixed projections — get in touch with photos and dimensions, or use the custom request form. Manufactured in Birmingham, backed by decades of laser cutting and fabrication.
